Delfield 18672PDLP 72" Two Door Refrigerated Pizza Prep Table with Dual LiquiTec Raised Rails

Delfield 18672PDLP 72" Two Door Refrigerated Pizza Prep Table with Dual LiquiTec Raised Rails

Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Features

• 48” Dual Rail Prep Table with (4) 12”X20” pan openings
• 72” Dual Rail Prep Table with (6) 12”X20” pan openings
• Base Interior
  • Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25" (63.5cm) deep removable epoxy coated wire shelf. Base is insulated with 2" (5.1cm) high density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) foamed in place polyurethane. End of base has a machine compartment with condensing units installed.
• Casters
  • Equipment is mounted on 4" (10cm) diameter casters.
• Door(s)
  • 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner.
• Electrical Connections
  • 115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8' (2.4m) cord and plug.
• Exterior Back, Bottom and Ends
  • Unfinished galvanized steel back and bottom. Exterior ends are finished with 22-gauge stainless steel.
• Exterior Top
  • Constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front. Top has two mechanically cooled LiquiTec^® refrigerated raised rails at the rear with openings to accommodate pans (provided by others). Rail interiors are 22-gauge stainless steel. Raised rail openings have 18-gauge stainless steel hinged removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rails. Temperature in top openings maintains 33°F (1°C) to 41°F (5°C) with pans flush mounted at 86°F (29.7°C) ambient room temperature, meeting NSF 7 requirements.
• Refrigeration System
  • R290 refrigerant. Cabinet has (1) blower coil assembly with expansion valve on 48" and 72" models. Refrigerated base maintains temperature of 36°F (2°C) to 40°F (4°C). On/off switches for rail and base are located behind the louvered panel. A 2" diameter hole is on the louver for easy access to rail on/off switch